Yapı Sözlüğü : Ahşap ve demir
--------------------------------------
Günümüz Sıcak su ısıtıcıları, garantili bir sirkülasyon pompası ile radyatörler için kazanın ısı taşıma kapasitesine sahiptir.
Tek küçük pompalarının faydaları çok zengindir. 5 ila 7 watt lık düşük bir elektrik tüketimi ile verimli sirkülasyon için pompaları bulunmaktadır.genellikle 30 watt ya da daha fazla uygulanan pompalama vardır. Genel olarak, bu pompalar günümüzde demir oksit boya özden demir ve boya demir boyama
çok büyük darbe olarak varsayılır. Zaten A sınıfı enerjinin , neredeyse yüzde 90 elektrik tasarrufu yüksek verimlilik pompaları vardır.
Buharlı Isıtma Buharın oluşması için suyun yüz C üğzerinde kaynaması gerekmektedir. Üretilen su buhar boru hattı ve haciz altındaki ısı radyatörlerine yoğun olarak ulaşır. Bu yoğuşma gizli ısı ısı yayar ve cok büyük bir ısı çıkışı sağlar.
Buharlı ısıtma 112-120 °C bir sıcaklıga karşılık, yaklaşık 2 atmosferlerde, 1 basıncın altında olur. Buhar ısıtma gerekirse en yüksek performansı 3-4 atmosferlere kadar yükselir. Buna ek olarak, hava ısıtıcısı ve buhar ısıtma sistemide vardır. bu sistemlerin en büyük özellikleri demir boyalarının sağlam ve yerinde yapılmasıdır.Kazan,gelen buharı doğrudan ana boru aracılığıyla ahşap boyama demir oksit boya demir boyama boyama şubelere ve rahyadörlere (kadar) tek tek ulaştırır. Ayrıca buharlı ısıtma sisteminde otomatik çift vana bulunmaktadır.
[Construction Section 49]
Circulating
In todays hot-water heaters, the transport of heat from the boiler to the radiators with a guaranteed circulation pump. In single-rich in general, the smallest pumps benefits. The circulation pumps efficiently for the one-and two-family house area today, with a low electric power consumption of 5 to 7 watts, often are pumping at 30 watts or even more. In general, the pumps today triply too big blow. There are already high-efficiency pumps of the energy class A, the electricity savings of up to almost 90 percent.
Steam Heating
The hot water heating and steam heating the water above hundred degrees C warming. The produced water vapour is transported by pipeline and condensed in the heat radiators under levy; the condensate is flowing back to the boiler. The condensation released in the latent heat leads to a very large released heat output.
Steam heating is only under a pressure of approximately 2 atmospheres, which corresponds to a temperature of 112-120 °. The high performance of a steam heating if necessary is 3-4 atmospheres.
In addition, the steam heating system with an air heater combined.
The steam from the boiler is through a main pipe directly to the attic, and from there (through branches) to the individual radiators. The steam heating system has automatic double valves: at the steam flowing off the air, and when the air flows QUEUING.