Lamine Parkeler

[Construction - Section 248]

Laying and sticking

Previously Veneer Parquet was always together with glue. There were to insert together the tongue and groove were mostly glued on and then stabilized and moisture proof. Today, however, more and more Veneer Parquets relocated without glue. For some time, the laying of floor with tubes or with various click systems for faster and simpler assembly.

Wood species

Although bamboo is on the upswing, Parquets remain in the traditional way. The blades are usually made of oak, beech and pine. However, there are Parquets from other woods like bamboo, cherry and maple. Ash, birch, walnut, birch, teak, etc. are other variants. Even the wood of the olive tree can be very well used.
The different types of wood next to the appearance, such as color, etc., in its structure and strength. The hardness of wood with special procedures will be determined. Veneer Parquet may be partly depending on the construction, floating. They need not be attached to the ground. Here, as in the case with the firm affiliated Veneer Parquet, a joint strain to the wall or in the transition to other floor coverings to create. This prevents a vault of the flooring at a later change in humidity in the room.

Layer structure and quality

The layer structure is the Veneer Parquet an essential quality. Even the distinction may be helpful. The top layer is made of real wood. The top layer is then oiled or lacquered. These may include one or more carrier and stability layers. Mostly, these layers rods from spruce and so on. At some Veneer Parquet is a sound insulation, or a paper layer, which absorbs moisture and noise, as a bottom layer appropriate. If this is missing, making it before the laying of the floor separately, aluminum and the like, as a base.